If you have one of the older Russwin 2800, 2810 or 2820 door closers, you will have to replace it with a Corbin Russwin DC3210 for interior doors, or the Corbin Russwin DC6210 for exterior doors. Both the DC3210 and DC6210 will match the hole spacing of the Russwin 2800, 2810 and 2820 door closers, so you will not have to redrill holes. Your current door closer is probably marked SL72, Clarksdale, MS.
Use the DC3210 or DC6210 to replace your Russwin 2800, 2810 or 2820 door closer.
Do you know if they still make Clarksdale miss sl72 door closers. If not what would be a replacement for it and not have to drill holes. Thanks Nate
Nathan,
The DC3210 and the DC6210 have the same hole spacings as the Clarksdale Miss SL72 Door Closer. They mount on the quick adapter plate the same way. If you have an interior door I would recommend the DC3210. If you have an exterior door I would recommend the DC6210. With either of these door closers, you will not have to re-drill holes. These door closer can be found on our website under Corbin Russwin Door Closers.
Greg
1-800-642-2403
Thanks a lot Gregg. I appreciate the quick feedback. Nate
how do i replace the clarksdale ms 92, hoping to use same holes
Dan,
To replace the MS 92 Clarksdale ms door closer you would use the DC3210 or the DC6210 depending on the installation. If you have an interior door I would use the DC3210, shown on this page, https://www.rbadoor.com/corbin-russwin-door-closer-dc3210.html . If the door is an exterior door I would use the DC6210, which is shown on this page, https://www.rbadoor.com/corbin-russwin-door-closer-dc6210.html . Both of these door closer will have the same hole spacing as the MS 93 Clarksdale MS door closer.
Greg
1-800-642-2403
I have an old Clarkdale-Corbin door closer that is not allowing the door to fully close. You can push it shut and it remains closed, but when opened again it stays open about 6″. I can send you picture of the door closer if you send me an e-mail.
We would like to replace a Ckarksdale hydraulic door closer installed
since long time, model MISS SL72.
Does it exist same model or equivalence model.
thank’s to reply
The number SL72, is telling me you have either the old Corbin 100 series or Russwin 2800. The newer Corbin Russwin DC6210 will work in its place, same mounting holes and everything: https://www.rbadoor.com/corbin-russwin-door-closer-dc6210.html
Greg