If you have one of the older Corbin 100, 110 or 120 door closers, you will have to replace it with a Corbin Russwin DC3210 for interior doors, or the Corbin Russwin DC6210 for exterior doors. Both the DC3210 and DC6210 will match the hole spacing of the Corbin 100, 110 or 120 door closers, so you will not have to redrill holes. Your current door closer is probably marked SL72, Clarksdale, MS.
Replacement Corbin 100, 110 and 120 Door Closers
Categories
Door Closers
Related Post
- Door Closer Repair
A commercial door closer is an installed hardware device that creates a vacuum. This vacuum…
- Door Closer Slamming-We Can Help
Is your Door Closer slamming? If it is we can help. They usually slam for…
- LCN Door Closer – a users guide
There are a lot of LCN Door Closer applications out there. But with a little…