For us to replace your current door closer we need to know the manufacture and the model or series number. If your closer has a cover over it, you might have to remove that cover. Many manufactures do have stickers on the cylinder under cover. If you cannot find a model number or a manufacturer, we would need to know the center-to-center hole spacing on your existing door closer. From this we could line up a replacement so you do not have to re-drill holes. The replacement table is shown on our website
Choosing the correct door closer
Categories
Door Closers
Related Post
- Door Closer Repair
A commercial door closer is an installed hardware device that creates a vacuum. This vacuum…
- Door Closer Slamming-We Can Help
Is your Door Closer slamming? If it is we can help. They usually slam for…
- LCN Door Closer – a users guide
There are a lot of LCN Door Closer applications out there. But with a little…